ESU 58721 LokSound 5 micro DCC Direct voor Atlas (N)

n. Auxiliary registers exist for command stations that can only program CVs from 1-255.

The LokSound 5 micro DCC Direct Decoder recognises the Märklin® brake sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. Furthermore, it also stops with a Selectrix® brake diode. An ABC shuttle train automatic allows automatic shuttling between two stations. The LokSound 5 micro DCC Direct can be used on analogue DC railways.

The decoder switches between the operating modes fully automatically "on-the-fly". Mostly nothing has to be set.

Sound
The LokSound 5 micro DCC Direct decoder can play back up to 12 channels simultaneously. Each channel can be resolved with up to 16 bit / 31250 kHz and offers HiFi quality on your layout. There is practically no audible difference to the original. A Class-D audio amplifier with up to 3W output power drives the speakers, which may have an impedance of between 4 Ohm and 32 Ohm. A 128 Mbit sound memory provides sufficient capacity.

The volume of all individual sounds can be adjusted individually. The super-flexible sound engine without a rigid schedule allows the prototypically accurate simulation of all conceivable rail vehicles.

Functions
On the LokSound 5 micro DCC Direct there are 10 directly soldered LEDs. Two of them are for the front and rear headlights, two more are connected to the AUX3 and AUX4 outputs, e.g. to switch numberboards. A further 6 LEDs on the underside are provided for ditchlights, but can also be used for other lighting purposes if desired. All important lighting functions are available. The brightness of each output can be adjusted separately.

Motor control
The motor control of the LokSound 5 micro DCC Direct features a variably adjustable PWM clock frequency from 10kHz to 50kHz, which ensures super-quiet operation, especially with bell armature motors - the previously typical "humming" is a thing of the past. The load control can also be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function allows automatic tuning of the decoder to the motor. The LokSound 5 micro DCC Direct Decoder delivers up to 0.75A motor current.

Protection
Of course, the outputs are protected against overload. We want you to enjoy your decoder as long as possible