Boven € 250,- geen verzendkosten!
Vakkundig en onafhankelijk advies
Support van A tot Z
Webwinkel Keurmerk

ESU

ESU LokSound V5

€99,99
150
Out of stock
+ -

Product description

The LokSound 5 is the most important member of the LokSound family. By combining a digital decoder and a sound module on a printed circuit board, we achieve dimensions of only 30 mm x 15.5 mm and can therefore be installed in almost all H0 and 0 gauge locomotives.

LokSound 5 decoders are offered with all common interfaces and are always supplied with an 11x15mm "sugar cube" speaker and sound capsule kit.

modes
Like all family members, the LokSound5 is a true multi-protocol decoder. He masters the DCC data format as well as Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital exchange.

It controls all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control panels. There are auxiliary registers for panels that can only program CVs of 1-255.

Motorola® users benefit from a maximum of 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable control unit 6021.

The M4 protocol allows automatic registration with mfx® compatible panels.

The LokSound 5 decoder recognizes the Märklin® braking distances as well as ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake modules or DC voltage is also possible. It also stops with a Selectrix® brake diode. An automatic ABC shuttle makes automatic commuting between two stations possible.

The LokSound 5 decoder can be used on analog DC and AC tracks.

sound
The LokSound 5 decoder can play up to 10 channels simultaneously. Each channel can be resolved with a maximum of 16 bit / 31250 kHz and finally offers hi-fi quality on your system. There is virtually no difference with the original that is more audible. A class D audio power amplifier with a maximum output of 3 W powers the speakers, which can have an impedance of 4 ohms and 32 ohms. The enormous 128 Mbit sound storage offers sufficient capacity.

All individual sounds can be adjusted individually in volume. The super-flexible Soundengine without a rigid scheme makes the prototypical simulation of all conceivable rail vehicles possible. Three separately adjustable braking functions and two alternative loading scenarios give you maximum control over your vehicles.

Characteristics
We know that you want your locomotives to be as realistic as possible. That is why we packed the LokSound 5 with function outputs. Depending on the interface version, each LokSound 5 decoder offers at least 10 amplified function outputs. For versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or outputs at the logic level. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder takes care of switching disconnection on and off for ROCO®, Krois® and Telex® couplings.

motor control
The motor control of the LokSound 5 has again been fundamentally improved. A variably adjustable PWM clock frequency from 10 kHz to 50 kHz ensures super quiet operation, especially in clock anchor motors - the typical "humming" is a thing of the past. The tax scheme can now be adapted to difficult cases with a maximum of 10 CVs. The unique "Autotune" function enables automatic decompression from the decoder to the motor. The LokSound 5 decoder supplies up to 1.5 A motor current with enough juice for older engines.

Technical specifications
Use under DCC with RailComPlus®, M4, Motorola® and Selectrix®
32 functions can be switched (depending on the control panel)
32-bit processor
Digital class "D" amplifier with a power up to 3 W (LokSound 5 XL: 13 W)
Each channel in 16-bit resolution and 31250 kHz sampling frequency
Sound memory with 128 Mbit capacity
Motor control with 50 kHz clock frequency
RC servos and Susi modules can be operated
3 new, individually adjustable brake controls
Two-stage heavy load simulation
To be updated with ESU-LokProgrammer

LokSound 5
Universal sound decoder for the meter H0 and track 0
Motor current 1.5A
Depending on the interface up to 12 amplified function outputs for special functions (total: up to 15 outputs)
10 audio channels can be played simultaneously
Ex works with 11x15 mm "sugar cube" speakers with adjustable sound capsule set
PowerPack storage capacitor can be connected optionally
Dimensions: 30 mm x 15.5 mm, height depending on interface

interfaces:

8 pin NEM 652
PluxX22
6 pin NEM 651
21MTC
21 MTC MKL

Review (0)

0 stars based on 0 reviews
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »