Klantenservice
0
Close

Categories

Filters

    ESU LokSound micro V5

    Product description

    The LokSound 5 micro is a "little miracle": with only 21 mm x 10 mm footprint, this is by far the smallest LokSound decoder we have ever built. It must therefore be used in all vehicles of nominal sizes N and TT, but also in small H0 vehicles. LokSound 5 micro decoders always have a Next18 interface and are offered with adapter plugs for all common interfaces. An 11x15 mm "sugar cube" speaker and sound capsule kit is always included.

    Modes
    The LokSound 5 micro is also a true multi-protocol decoder. He masters the DCC data format as well as Motorola®, Selectrix® and M4. In the DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log in fully automatically to a suitable digital exchange.

    It controls all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control panels. There are auxiliary registers for panels that can only program CVs of 1-255.

    Motorola® users benefit from a maximum of 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable control unit 6021.

    The M4 protocol allows automatic registration with mfx® compatible panels.

    The LokSound 5 micro decoder recognizes the Märklin® braking distances as well as ZIMO® HLU braking commands or the Lenz® ABC system. Braking with DCC brake modules or DC voltage is also possible. It also stops with a Selectrix® brake diode. An automatic ABC shuttle makes automatic commuting between two stations possible.

    The LokSound 5 microdecoder can be used on analog DC and AC rails (!).

    Sound
    The LokSound 5 micro decoder can play up to 10 channels simultaneously. Each channel can be resolved with a maximum of 16 bit / 31250 kHz and finally offers hi-fi quality on your system. There is virtually no difference with the original that is more audible. A class D audio power amplifier with a maximum output of 3 W powers the speakers, which can have an impedance of 4 ohms and 32 ohms. The enormous 128 Mbit sound storage offers sufficient capacity.

    All individual sounds can be adjusted individually in volume. The super-flexible Soundengine without a rigid scheme makes the prototypical simulation of all conceivable rail vehicles possible. Three separately adjustable braking functions and two alternative loading scenarios give you maximum control over your vehicles.

    Characteristics
    Despite its small size, the LokSound 5 micro has at least 6 amplified function outputs as well as a logic level output. There are two more logical level outputs on the Next18 interface, which can alternatively control RC servos. All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder takes care of switching disconnection on and off for ROCO®, Krois® and Telex® couplings.

    motor control
    The motor control of the LokSound 5 has again been fundamentally improved. A variably adjustable PWM clock frequency from 10 kHz to 50 kHz ensures super quiet operation, especially in clock anchor motors - the typical "humming" is a thing of the past. The tax scheme can now be adapted to difficult cases with a maximum of 10 CVs. The unique "Autotune" function enables automatic decompression from the decoder to the motor. The LokSound 5 decoder delivers up to 0.75 A motor current enough juice for all intended usage scenarios.

    Technical dating

    Operated under DCC with RailComPlus®, M4, Motorola® and Selectrix®

    32 functions switchable (depending on the control panel)

    32-bit processor

    Digital Class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W)

    Each channel in 16-bit resolution and 31250 kHz sample rate

    Noise memory with 128 Mbit capacity

    Motor control with 50 kHz Stroke frequency

    RC servos and Susi modules can be controlled

    3 new, individual adjustable brake controllers

    Whimsical heavy load simulation

    Update with ESU LokProgrammer
    LokSound 5 micro

    Motor current 0.75 A

    Depending on the interface, up to 6 amplified function outputs for special functions (total: 9 outputs)

    Next18 interface as standard, adapter cable for other interface included

    Ex works with 11x15 mm "sugar cube" speakers with customizable sound cap set

    RC servos and Susi modules can be controlled

    PowerPack storage capacitor optionally connectable

    Dimensions: 21mm x 10mm
    interfaces

    8-pin NEM 652

    PluX16

    6-pin NEM 651

    Next18

    Show more

    Specifications

    Article number
    58818
    SKU
    58818

    Show more

    Reviews

    0 from 5Based on 0 reviews
    Create your own review

    There are no reviews written yet about this product..

    ESU LokSound micro V5
    € 114,99
    ESU LokSound micro V5
    Connection : 58818 | Next18
    0 In stock
    Add to cart

    Meest bekeken producten

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »