Klantenservice
0
Close

Categories

Filters

    Lokpilot 5 Fx micro

    Product description

    The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects.

    LokPilot 5 Fx micro decoders are always offered with an 8-pin interface.

    modes
    The LokPilot 5 Fx micro is a real multi-protocol decoder. It masters the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and thanks to RailCom®, the CV values ​​on the main track can be read out with the appropriate control units. Auxiliary registers exist for control centers that can only program CVs from 1-255. Motorola® users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola® addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.

    The LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also be automatically registered with the relevant control center using RailComPlus®.

    The LokPilot 5 Fx micro decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations. This is also important for a function decoder in order to be able to synchronize control cars and motor vehicles.

    The LokPilot 5 Fx decoder can be used on analog DC railways.

    The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set.

    features
    The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. There are 6 amplified function outputs, each with 180mA output current, and two logic level outputs for servos or Susi. The brightness of each output can be set separately.

    operational safety
    On request, a PowerPack can be connected to the LokPilot 5 Fx micro and LokPilot 5 Fx micro DCC to bridge dirty rail sections.

    protection
    Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

    Show more

    Reviews

    0 from 5Based on 0 reviews
    Create your own review

    There are no reviews written yet about this product..

    Lokpilot 5 Fx micro
    € 39,40
    Lokpilot 5 Fx micro
    Uitvoering : DCC
    0 In stock
    Add to cart

    Meest bekeken producten

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »