Klantenservice
0
Close

Categories

Filters

    ESU Lokpilot V5 micro DCC

    Product description

    The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price.

    LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ​​13.0mm x 9.2mm, but have 2 additional function outputs.

    modes
    The LokPilot 5 micro DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.

    It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.

    The LokPilot 5 micro DCC decoder recognizes the Märklin® braking distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.

    The LokPilot 5 DCC decoder can be used on analog DC railways. The maximum speed can be set separately.

    The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set.

    features
    We know that you want your locomotives to be as realistic as possible. That is why we have equipped the LokPilot 5 micro DCC with an astonishing number of function outputs. The versions with 6-pin or 8-pin wiring harness offer 4 amplified function outputs with 180mA output current each as well as two logic level outputs for servos or Susi. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.

    motor control
    The engine control of the LokPilot 5 micro DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. The LokPilot 5 micro DCC decoder with up to 0.75A motor current provides enough juice for the intended application scenarios.

    operational safety
    On request, a PowerPack can be connected to the LokPilot 5 micro to bridge dirty rail sections.

    protection
    Of course, the motor output and the function outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

    Show more

    Reviews

    5 from 5Based on 1 reviews
    Create your own review
    5 from 5
    Prima produkt, tevreden mee.
    Posted by: Bommeldam on 14 February 2023
    ESU Lokpilot V5 micro DCC
    € 39,40
    ESU Lokpilot V5 micro DCC
    Uitvoering : NEM 651 direct 6-Pins
    0 In stock
    Add to cart

    Meest bekeken producten

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »