ESU ESU Lokpilot V5 DCC

  • In stock (1)
€35,40
Buy 5 for €33,63 each and save 5%
Buy 10 for €31,86 each and save 10%
Uw digitaal expert, van advies tot installatie!
Support ook bij u thuis!
Goede informatie en ondersteuning
Ombouw-en reparatieservice
Webwinkel-keurmerk
9.5/10
400+ ReviewsWebwinkel keurmerk
Product information

    The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price

    LokPilot 5 decoders are offered with all common interfaces.

    modes
    The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically.

    It masters all DCC programming modes and, thanks to RailCom®, the CV values ​​on the main track can be read out with suitable control centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.

    The LokPilot 5 DCC decoder recognizes the Märklin® braking sections as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake modules or with DC voltage is also possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle train enables automatic commuting between two stations.

    The LokPilot 5 DCC decoder can be used on analog DC railways. The maximum speed can be set separately.

    The decoder switches between the operating modes fully automatically "on-the-fly". Usually nothing needs to be set.

    features
    We know that you want your locomotives to be as realistic as possible. That is why we packed the LokPilot 5 DCC with function outputs. Depending on the interface version, each LokPilot 5 DCC decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO®, Krois® and Telex® couplings.

    motor control
    The engine control of the LokPilot 5 DCC has been fundamentally improved again. A variably adjustable PWM clock frequency from 10kHz to 50kHz ensures super quiet operation, especially with bell-armature motors - the typical "hum" is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique "Autotune" function enables the decoder to be automatically calibrated to the motor. The LokPilot 5 DCC decoder with up to 1.5A motor current provides enough juice even for older motors.

    operational safety
    If required, a PowerPack can be connected to the LokPilot 5 DCC to bridge dirty rail sections.

    protection
    Of course, all function outputs and the motor output are protected against overload. We want you to enjoy your decoder for as long as possible.

    Reviews
    No reviews found
    Add your review

    Laat hier weten wat uw van dit artikel vind